Back to Contents Page
Express Card Cage
Dell Precision™ Service Manual
Removing the Express Card Cage
Replacing the Express Card Cage
Removing the Express Card Cage
1.
Follow the procedures in
Before Working on Your Computer
.
2.
Remove the hard drive (see
Removing the Hard Drive
).
3.
Remove the modular drive (see
Removing the Modular Drive
).
4.
Remove the bottom of the base assembly (see
Removing the Bottom of the Base Assembly
).
5.
Remove the display assembly (see
Removing the Display Assembly
).
6.
Remove the keyboard (see
Removing the Keyboard
).
7.
Remove the palm rest assembly (
Removing the Palm Rest Assembly
).
8.
If a card is in the cage, remove the card.
9.
Remove the three M2 x 3-mm screws that secure the Express card cage to the base assembly.
10.
Disconnect the Express card cable from the system board.
11.
Lift the Express card cage away from the system board.
Replacing the Express Card Cage
1.
Attach one side of the carrier and then the other and set it in place.
2.
Replace the three M2 x 3-mm screws to secure the Express card cage to the base assembly.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
1 Express card carrier
2 M2 x 3-mm screw (3)
3 Express card cable connector
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
Summary of Contents for M4400 - Precision Mobile Workstation
Page 11: ......
Page 17: ...Back to Contents Page ...
Page 29: ......
Page 42: ...6 Follow the procedure After Working on Your Computer Back to Contents Page ...
