4.
Tighten the M2 x 3-mm screw that secures the camera/microphone assembly to the display cover.
5.
Replace the display bezel (see
Replacing the Display Bezel
).
6.
Replace the display assembly (see
Replacing the Display Assembly
).
Removing the Latch Hook
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the display assembly (see
Removing the Display Assembly
).
3.
Remove the display bezel (see
Removing the Display Bezel
).
4.
Remove the M2.5 x 5-mm screw.
5.
Remove the latch hook from the display cover.
6.
Replacing the Display Assembly
).
Replacing the Latch Hook
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Position the latch hook on the display cover.
3.
Replace the M2.5 x 5-mm screw.
4.
Replace the display bezel (see
Replacing the Display Bezel
).
5.
Replace the display assembly (see
Replacing the Display Assembly
).
Removing the Display Bracket
1.
Remove the two M2 x 3mm screws from the display bracket.
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1 M2.5 x 5-mm screw (1) 2 latch hook
3 display cover
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
Summary of Contents for M4400 - Precision Mobile Workstation
Page 11: ......
Page 17: ...Back to Contents Page ...
Page 29: ......
Page 42: ...6 Follow the procedure After Working on Your Computer Back to Contents Page ...
