7.
Replace the two M2 x 3-mm screws securing the PC card cage.
8.
Replace the Express card cage (see
Replacing the Express Card Cage
).
9.
Connect the Express card cable to the system board.
10.
Replace the SD card reader assembly (see
Replacing the SD Card Reader
).
11.
Connect the SD card cable to the system board.
12.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
13.
Replace the keyboard (see
Replacing the Keyboard
).
14.
Replace the LED cover (see
Replacing the LED Cover
).
15.
Replace the display assembly (see
Display Assembly
).
16.
Replace the hinge covers (see
Replacing the Hinge Covers
).
17.
Replace the modem (see
Replacing the Modem
).
18.
Connect the DC power cable to the system board.
19.
Connect the coin-cell battery cable to the system board (see
Replacing the Coin-Cell Battery
).
20.
Replace the discrete graphics heat sink (see
Replacing the Discrete Graphics Heat Sink
).
21.
Replace the processor (see
Replacing the Processor Module
).
22.
Replace the processor heat sink (see
Replacing the Processor Heat Sink
).
23.
Replace the fan (see
Replacing the Fan
).
24.
Replace the memory modules (see
Replacing a Memory Module
).
25.
Replace the WPAN/UWB/FCM card if one was installed (see
Replacing a WPAN/UWB Card
).
26.
Replace the WLAN/WiMax card if one was installed (see
Replacing a WLAN Card
).
27.
Replace the WWAN/FCM card if one was installed (see
Replacing a WWAN Card
).
28.
Replace the bottom of the base assembly (see
Replacing the Bottom of the Base Assembly
).
29.
Replace the modular drive (see
Removing the Modular Drive
).
30.
Replace the hard drive (see
Removing the Hard Drive
).
31.
Follow the procedure
After Working on Your Computer
.
32.
Turn on the computer.
33.
Update the BIOS (see
Flashing the BIOS
for more information).
34.
Enter the system setup program to update the BIOS on the new system board with the computer Service Tag. For information on the system setup
program, see the
Dell™ Technology Guide
on your computer on at s
upport.dell.com
.
Back to Contents Page
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
NOTE:
If you use a BIOS update program CD to flash the BIOS, press <F12> before inserting the CD in order to set the computer to boot from the CD
for one time only. Otherwise, you must enter the system setup program to change the default boot order.
Summary of Contents for M4400 - Precision Mobile Workstation
Page 11: ......
Page 17: ...Back to Contents Page ...
Page 29: ......
Page 42: ...6 Follow the procedure After Working on Your Computer Back to Contents Page ...
