background image

Regulatory Notices

C-1

Appendix C

Regulatory Notices

A

ll regulatory notices for the computer are located on 

the bottom of the computer.

F

CC Class B Notice (U.S. Only)

NOTE:  This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in 
accordance with the manufacturer’s instruction manual, 
may cause interference with radio and television recep-
tion. This equipment has been tested and found to comply 
with the limits for a Class B digital device pursuant to 
Part 15 of the Federal Communications Commission 
(FCC) Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a 
residential installation. However, there is no guarantee 
that interference will not occur in a particular installation. 
If this equipment does cause harmful interference with 
radio or television reception, which can be determined by 
turning the equipment off and on, you are encouraged to 
try to correct the interference by one or more of the fol-
lowing measures:

Reorient the receiving antenna.

Relocate the computer with respect to the receiver.

Move the computer away from the receiver.

Plug the computer into a different outlet so that the 
computer and the receiver are on different branch 
circuits.

If necessary, consult a representative of Dell Computer 
Corporation or an experienced radio/television technician 
for additional suggestions. You may find the following 
booklet helpful: FCC Interference Handbook, 1986
available from the U.S. Government Printing Office, 
Washington, DC 20402, Stock No. 004-000-00450-7.

Note that FCC regulations provide that changes or modi-
fications not expressly approved by Dell Computer 
Corporation could void your authority to operate this 
equipment.  

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, 
including interference that may cause undesired 
operation.

The following information is provided on the device or 
devices covered in this document in compliance with 
FCC regulations: 

Product name: Dell Latitude XPi CD

Model number: PPS

Company name: Dell Computer Corporation
Regulatory Department
2214 W. Braker Lane
Austin, Texas 78758 USA 
512-338-4400

A Notice About Shielded Cables: Use only shielded
cables for connecting peripherals to any Dell device
to reduce the possibility of interference with radio
and television reception. Using shielded cables
ensures that you maintain the appropriate FCC
certification for a Class B device of this product.
For parallel printers, a cable is available from Dell
Computer Corporation.

Summary of Contents for Latitude XPi CD





















































































































































Reviews: