Back to Contents Page
DC Power Cable
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
Removing the DC Power Cable
Replacing the DC Power Cable
Removing the DC Power Cable
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the bottom of the base assembly (see
Removing the Bottom of the Base Assembly
).
3.
Remove the hard drive (see
Removing the Hard Drive
).
4.
Remove the modular drive (see
Removing the Modular Drive
).
5.
Remove the hinge covers (see
Removing the Hinge Covers
).
6.
Remove the heatsink assembly (see
Removing the Processor Heatsink Assembly
).
7.
Remove the display assembly (see
Removing the Display Assembly (E6400 and M2400)
or
Removing the Display Assembly (E6400 ATG)
).
8.
Remove the LED cover (see
Removing the LED Cover
).
9.
Remove the keyboard (see
Removing the Keyboard
).
10.
Remove the right speaker grill (see
Removing the Right Speaker Grill/Fingerprint Reader Assembly
).
11.
Remove the palm rest assembly (see
Removing the Palm Rest Assembly
).
12.
Remove the card cage (see
Removing the Card Cage
).
13.
Remove the system board (see
Removing the System Board Assembly
). Do not remove the wireless mini-cards, memory modules, or processor from the
system board.
14.
Unroute the DC power cable from the base assembly and remove it.
Replacing the DC Power Cable
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
DC power connector
2
DC cable
Summary of Contents for Latitude E6400 ATG
