Dell Latitude E6400 ATG Service Manual Download Page 94

Page: 94 / 100

customized for content, format, and how frequently you receive notifications.

To enroll for the Dell Technical Update service, go to

support.dell.com

Dell Support Utility

The Dell Support Utility is installed on your computer and available from the Dell Support,

, icon on the taskbar or from the

Start

button. Use this support

utility for self-support information, software updates, and health scans of your computing environment.

Accessing the Dell Support Utility

Access the Dell Support Utility from the

icon on the taskbar or from the

Start

menu.

If the Dell Support icon does not appear in your taskbar:

Click

Start

All Programs

Dell Support

Dell Support Settings

Ensure that the

Show icon on the taskbar

option is checked.

The Dell Support Utility is customized for your computing environment.

The

icon in the taskbar functions differently when you click, double-click, or right-click the icon.

Clicking the Dell Support Icon

Click or right-click the

icon to perform the following tasks:

Check your computing environment.

View the Dell Support Utility settings.

Access the help file for the Dell Support Utility.

View frequently asked questions.

Learn more about the Dell Support Utility.

Turn the Dell Support Utility off.

Double-Clicking the Dell Support Icon

Double-click the

icon to manually check your computing environment, view frequently asked questions, access the help file for the Dell Support Utility, and

view Dell Support settings.

For more information about the Dell Support Utility, click the question mark (

)

at the top of the

Dell

™

Support

screen.

Back to Contents Page

NOTE:

If the Dell Support Utility is not available from the

Start

menu, go to

support.dell.com

and download the software.

Summary of Contents for Latitude E6400 ATG





































































































Search results

Summary of Contents for Latitude E6400 ATG

Reviews:

Related manuals for Latitude E6400 ATG

Brands by name

Popular brands

Dell Latitude E6400 ATG, Service Manual

Search results

Summary of Contents for Latitude E6400 ATG

Reviews:

Related manuals for Latitude E6400 ATG

Brands by name

Popular brands