3.
If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.
4.
Disconnect all telephone or network cables from the computer.
5.
Close the display and turn the computer upside down on a flat work surface.
6.
Disconnect your computer and all attached devices from their electrical outlets.
7.
Remove the main battery:
a.
Slide the two battery-bay latch releases on the bottom of the computer.
b.
Remove the battery from the battery bay.
8.
Press the power button to ground the system board.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you service the computer.
1
battery
2
battery-bay latch releases (2)
