manualshive.com logo in svg

Dell Inspiron One 2205, Service Manual, Page: 68 / 74

Share
Download
Dell Inspiron One 2205 Service Manual Download Page 68

Back to Contents Page

  

 

 Technical Overview  

Dell™ Inspiron™ One 2205 Service Manual 

 

  

Inside View of Your Inspiron One 

 

  

System Board Components 

 

 

 

 

 

 

 

Inside View of Your Inspiron One  

  

 

System Board Components  

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

1 

memory module(s) 

2 

processor heat-sink 

3 

MXM assembly 

4 

MXM-assembly fan 

5 

converter card 

6 

processor heat-sink fan 

7 

touch screen control card (optional) 

8 

optical drive 

9 

middle frame 

10  hard-drive assembly 

11  system board 

Summary of Contents for Inspiron One 2205











































































Reviews:

No comments