manualshive.com logo in svg

Dell Inspiron One 2205, Service Manual, Page: 53 / 74

Share
Download
Dell Inspiron One 2205 Service Manual Download Page 53

 

 

  

5.

Replace the middle frame (see 

Replacing the Middle Frame

).  

 

 

  

6.

Route the speakers cable through the routing guides and connect the speakers cable to the connector (CN10) on the system board.  
 

 

  

7.

Replace the system-board shield (see 

Replacing the System-Board Shield

).  

 

 

  

8.

Replace the rear stand cover (see 

Replacing the Rear Stand Cover

).  

 

 

  

9.

Follow the instructions from 

step 4

 to 

step 7

 in 

Replacing the Front Stand

.  

 

 

  

10.

Follow the instructions from 

step 5

 to 

step 7

 in 

Replacing the Optical Drive

.  

 

 

  

11.

Replace the back cover (see 

Replacing the Back Cover

).  

 

 

 

 

 

12.

Connect your computer and all attached devices to electrical outlets, and turn them on.  
 

Back to Contents Page

 

 

 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Inspiron One 2205











































































Reviews:

No comments