5.
Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.
6.
Wait for approximately five seconds to clear the CMOS setting.
7.
Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3.
8.
Replace the system-board shield (see
Replacing the System-Board Shield
).
9.
Replace the back cover (see
Replacing the Back Cover
).
10.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Summary of Contents for Inspiron One 2205
