5.
Connect the MXM-assembly fan cable to the connector (MXM FAN) on the system board.
6.
Replace the system-board shield (see
Replacing the System-Board Shield
).
7.
Replace the rear stand cover (see
Replacing the Rear Stand Cover
).
8.
Follow the instructions from
step 4
to
step 7
in
Replacing the Front Stand
.
9.
Replace the back cover (see
Replacing the Back Cover
).
10.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Summary of Contents for Inspiron One 2205
