manualshive.com logo in svg

Dell Inspiron 5584, Service Manual

Share
Download
Dell Inspiron 5584 Service Manual Download Page 77

Identifier

GUID-A35BD2D5-B3B3-4708-AF1C-D61C58B9F952

Status

Released

Removing the power-button board

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

Identifier

GUID-B255026D-5E98-4C22-9DF5-8B7CD1477321

Status

Released

Prerequisites

1 

Remove the 

base cover

.

2 

Remove the 

fan

.

Identifier

GUID-9FA9D974-A7CA-4865-B26E-9BC239C8B34D

Status

Released

Procedure

1 

Open the latch and disconnect the power-button board cable from the system board.

2 

Open the latch and disconnect the power-button cable from the power-button board.

3 

Using a plastic scribe, pry and peel the power-button board along with its cable from the palm-rest and keyboard assembly.

32

Removing the power-button board

77

Summary of Contents for Inspiron 5584













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands