manualshive.com logo in svg

Dell Inspiron 5584, Service Manual

Share
Download
Dell Inspiron 5584 Service Manual Download Page 17

Identifier

GUID-98068FC2-1C1C-46DE-B3FA-DF9D488E9BA1

Status

Released

Removing the base cover

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

Identifier

GUID-CCE47711-B4BC-4B9B-BA18-D74F5B7F402B

Status

Released

Procedure

1 

Remove the seven screws (M2.5x6) that secure the base cover to the palm-rest and keyboard assembly.

2 

Loosen the two captive screws on the base cover.

3 

Using a plastic scribe, pry the base cover starting from notches located at the top-left corner of the computer base.

4 

Lift the base cover off the palm-rest and keyboard assembly.

6

Removing the base cover

17

Summary of Contents for Inspiron 5584













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands