manualshive.com logo in svg

Dell Inspiron 531, Owner'S Manual

The Dell Inspiron 531, an exceptional desktop computer, offers seamless performance and impressive user-friendly features. Explore its full potential with the comprehensive Owner's Manual, available for free download at manualshive.com. This manual is a valuable resource for maximizing your experience with this exceptional product.

Share
Download
background image

Appendix

181

Dell provides limited technical support for the computer and any 
"Dell-installed" software and peripherals

1

. Support for third-party software 

and peripherals is provided by the original manufacturer, including those 
purchased and/or installed through Dell Software and Peripherals, 
Readyware, and Custom Factory Integration

2

.

1

 

Repair services are provided pursuant to the terms and conditions of your limited 
warranty and any optional support service contract purchased with the computer.

2

 

All Dell-standard components included in a Custom Factory Integration (CFI) project 
are covered by the standard Dell limited warranty for your computer. However, Dell 
also extends a parts replacement program to cover all nonstandard, third-party 
hardware components integrated through CFI for the duration of the computer’s 
service contract.

Definition of "Dell-Installed" Software and Peripherals

Dell-installed software includes the operating system and some of the 
software programs that are installed on the computer during the 
manufacturing process (Microsoft

®

 Office, Norton Antivirus, and so on).

Dell-installed peripherals include any internal expansion cards, or Dell-branded 
module bay or PC Card accessories. In addition, any Dell-branded monitors, 
keyboards, mice, speakers, microphones for telephonic modems, docking 
stations/port replicators, networking products, and all associated cabling are 
included.

Definition of "Third-Party" Software and Peripherals

Third-party software and peripherals include any peripheral, accessory, or 
software program sold by Dell not under the Dell brand (printers, scanners, 
cameras, games, and so on). Support for all third-party software and 
peripherals is provided by the original manufacturer of the product.

FCC Notice (U.S. Only)

FCC Class B

This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the manufacturer’s instruction 
manual, may cause interference with radio and television reception. 
This equipment has been tested and found to comply with the limits for a 
Class B digital device pursuant to Part 15 of the FCC Rules.

book.book  Page 181  Friday, April 4, 2008  12:10 PM

Summary of Contents for Inspiron 531





















































































































































































































Reviews:

No comments

Related manuals for Inspiron 531

Mercury SmartCraft SC5000 Operation Manual preview
SmartCraft SC5000
Brand: Mercury Pages: 64
IBM PC 300GL Type 6267 Technical Information Manual preview
PC 300GL Type 6267
Brand: IBM Pages: 58
C&T VCO-6000 User Manual preview
VCO-6000
Brand: C&T Pages: 99
Compaq dc5800 - Microtower PC (Arabic) Troubleshooting Manual preview
dc5800 - Microtower PC
Brand: Compaq Pages: 69
DMP Electronics EBOX-335xDX3 Series User Manual preview
EBOX-335xDX3 Series
Brand: DMP Electronics Pages: 40
IBM PC 300GL Type 6285 Installation Manual preview
PC 300GL Type 6285
Brand: IBM Pages: 96
Moxa Technologies UC-7101 Hardware User Manual preview
UC-7101
Brand: Moxa Technologies Pages: 19
Acer Veriton M6618G Service Manual preview
Veriton M6618G
Brand: Acer Pages: 136
Acer Veriton M490G Service Manual preview
Veriton M490G
Brand: Acer Pages: 88
Vivo CART-V06A Instruction Manual preview
CART-V06A
Brand: Vivo Pages: 12
Uplift Desk Height Adjustable Standing Desk 4-Leg Manual preview
Height Adjustable Standing Desk 4-Leg
Brand: Uplift Desk Pages: 16
Vivo STAND-SIT2E Instruction Manual preview
STAND-SIT2E
Brand: Vivo Pages: 5
Shuttle DH110 Series Quick Manual preview
DH110 Series
Brand: Shuttle Pages: 1
Alpha Microsystems AM-1600 Upgrade Instructions preview
AM-1600
Brand: Alpha Microsystems Pages: 63
RadiSys EPC-8A Hardware Reference Manual preview
EPC-8A
Brand: RadiSys Pages: 122
Aaeon BOXER-6638U User Manual preview
BOXER-6638U
Brand: Aaeon Pages: 95
Aaeon BOXER-6640 User Manual preview
BOXER-6640
Brand: Aaeon Pages: 93
IBM NetVista 6644 User Manual preview
NetVista 6644
Brand: IBM Pages: 110

Brands by name

Popular brands

Load more brands