148
Removing and Installing Parts
Installing the Processor
NOTICE:
Ground yourself by touching an unpainted metal surface on the back of
the computer.
1
Follow the procedures in "Before You Begin" on page 97.
NOTICE:
Be careful not to bend any of the pins when you unpack the processor.
Bending the pins can permanently damage the processor.
2
Unpack the new processor, being careful not to bend any of the processor pins.
3
Extend the release lever on the socket fully.
NOTICE:
You must position the processor correctly in the socket to avoid permanent
damage to the processor and the computer when you turn on the computer.
4
Align the pin-1 corner of the processor and socket.
1
processor pin-1 indicator
2
processor
3
release lever
4
socket
2
3
1
4
book.book Page 148 Friday, April 4, 2008 12:10 PM
