manualshive.com logo in svg

Dell Inspiron 531, Owner'S Manual

The Dell Inspiron 531, an exceptional desktop computer, offers seamless performance and impressive user-friendly features. Explore its full potential with the comprehensive Owner's Manual, available for free download at manualshive.com. This manual is a valuable resource for maximizing your experience with this exceptional product.

Share
Download
background image

44

Setting Up and Using Your Computer

10

Press <Enter> to return to the previous screen.

11

Press <Ctrl><X> to exit the RAID BIOS.

Using Nvidia MediaShield

Nvidia MediaShield allows you to view and manage RAID configurations.

Rebuilding a RAID Configuration

If one of the hard drives in a RAID array fails, you can rebuild the array by 
restoring the data to a replacement drive.

 

NOTE: 

Rebuilding an array can only be performed on RAID 1 configurations.

1

Launch Nvidia MediaShield.

2

Click to select your RAID configuration (

Mirroring

) in the management 

utility window.

3

Select 

Rebuild Array

 in the

 System Tasks 

pane.

The 

NVIDIA

 

Rebuild Array Wizard

 appears.

4

Click 

Next

.

5

Select the hard drive you want to rebuild by clicking the checkbox beside it.

6

Click 

Next

.

7

Click 

Finish

.

The MediaShield RAID management utility window appears and displays 
the status of the rebuild process.

 

NOTE: 

You can use your computer while the computer is rebuilding the array.

 

NOTE: 

You can use any available (RAID-enabled) free disk to rebuild an array.

Transferring Information to a New Computer

You can use your operating system "wizards" to help you transfer files and 
other data from one computer to another—for example, from an old 
computer to a new computer. For instructions, see the following section that 
corresponds to the operating system your computer is running.

Windows

®

 XP:

The Microsoft Windows XP operating system provides the Files and Settings 
Transfer Wizard to move data from a source computer to a new computer.

book.book  Page 44  Friday, April 4, 2008  12:10 PM

Summary of Contents for Inspiron 531





















































































































































































































Reviews:

No comments

Related manuals for Inspiron 531

Vivo DESK-V000EB Instruction Manual preview
DESK-V000EB
Brand: Vivo Pages: 3
iameco ecoXPc Quick Start Manual preview
ecoXPc
Brand: iameco Pages: 3
Corvus systems TRS-80 II Installation Manual preview
TRS-80 II
Brand: Corvus systems Pages: 19
Shuttle XPC SD39P2 User Manual preview
XPC SD39P2
Brand: Shuttle Pages: 35
Partner PT-3000 Technical Specifications preview
PT-3000
Brand: Partner Pages: 5
Shuttle DS77U Series User Manual preview
DS77U Series
Brand: Shuttle Pages: 24
Atmark Techno Armadillo-J Startup Manual preview
Armadillo-J
Brand: Atmark Techno Pages: 24
AST Premmia PS Series User Manual preview
Premmia PS Series
Brand: AST Pages: 89
Aaeon AHP-1154 Manual preview
AHP-1154
Brand: Aaeon Pages: 85
Tandy Color Computer 3 TRS-80 Diagnostic Manual preview
Color Computer 3 TRS-80
Brand: Tandy Pages: 13
ICOP Technology PPC-090T-D2 User Manual preview
PPC-090T-D2
Brand: ICOP Technology Pages: 45
Campbell UT20 Product Manual preview
UT20
Brand: Campbell Pages: 47
Compaq Deskpro EP 6233 User Manual preview
Deskpro EP 6233
Brand: Compaq Pages: 126
Acer G330 - Altos - 1 GB RAM Configuration Manual preview
G330 - Altos - 1 GB RAM
Brand: Acer Pages: 95
Toshiba STOR.E ART 4 Installation And Maintenance Manual preview
STOR.E ART 4
Brand: Toshiba Pages: 278
ND ND-100 COMPACT Operator'S Manual preview
ND-100 COMPACT
Brand: ND Pages: 63
Asus Aaeon BOXER-6639M User Manual preview
Aaeon BOXER-6639M
Brand: Asus Pages: 104
Asus AAEON BOXER-6405U User Manual preview
AAEON BOXER-6405U
Brand: Asus Pages: 81

Brands by name

Popular brands

Load more brands