Dell Inspiron 531 Page 39 Owner'S Manual Download

Page: 39 / 212

Setting Up and Using Your Computer

Power Management Modes

Windows Vista has three main default power management modes:

•

Balanced

•

Power Saver

•

High Performance

Dell has added a fourth

Dell-Recommended

mode that sets power

management to the most typical settings for the majority of our
customers.This is the active Power Plan for all Dell shipping configurations.

To change the default settings for a plan:

Click

Start

and click

Control Panel

Under

Pick a category

, click

System and Maintenance

Under

System and Maintenance

, click

Power Options

A number of options are available on the left-hand side of the

Power Options

dialog box.

Click

Change Plan Settings

just below any of the power plans to change

settings such as:

•

Require a password on wakeup.

•

Choose what power buttons do.

•

Create a power plan (you can choose the settings you want and create a
custom power plan here).

•

Choose when to turn off the display

•

Change when the computer sleeps.

Advanced Tab

The Advanced tab allows you to set many different settings beyond the basic
ones above. If you do not know or are not sure what to set, then leave settings
at the default. To access the advanced settings:

Choose the

Power Plan

you want to change.

Click

Change Plan Settings

from just below the plan name.

Click

Change Advanced Power Settings

book.book Page 39 Friday, April 4, 2008 12:10 PM

Summary of Contents for Inspiron 531





















































































































































































































Search results

Summary of Contents for Inspiron 531

Reviews:

Related manuals for Inspiron 531

Brands by name

Popular brands

Dell Inspiron 531, Owner'S Manual

Search results

Summary of Contents for Inspiron 531

Reviews:

Related manuals for Inspiron 531

Brands by name

Popular brands