Dell Inspiron 3501 Service Manual Download

Page: 3 / 83

Chapter 1: Working inside your computer...................................................................................... 6

Chapter 2: Removing and installing components.......................................................................... 10

Removing the base cover...........................................................................................................................................13
Installing the base cover.............................................................................................................................................15

Solid-state drive................................................................................................................................................................. 17

Memory modules................................................................................................................................................................ 21

Removing the memory modules................................................................................................................................21
Installing the memory modules.................................................................................................................................22

Wireless card...................................................................................................................................................................... 23

Removing the wireless card...................................................................................................................................... 23
Installing the wireless card........................................................................................................................................ 24

Battery................................................................................................................................................................................. 26

Hard drive............................................................................................................................................................................28

Removing the hard drive........................................................................................................................................... 28
Installing the hard drive..............................................................................................................................................29

I/O board..............................................................................................................................................................................31

Removing the I/O board.............................................................................................................................................31
Installing the I/O board.............................................................................................................................................. 32

Coin-cell battery................................................................................................................................................................ 33

Removing the coin-cell battery................................................................................................................................33
Installing the coin-cell battery.................................................................................................................................. 33

Speakers.............................................................................................................................................................................. 34

Removing the speakers..............................................................................................................................................34
Installing the speakers................................................................................................................................................35

Heat sink..............................................................................................................................................................................36

Removing the heat sink............................................................................................................................................. 36

Contents

Summary of Contents for Inspiron 3501




















































































Search results

Summary of Contents for Inspiron 3501

Reviews:

Related manuals for Inspiron 3501

Brands by name

Popular brands

Dell Inspiron 3501, Service Manual

Search results

Summary of Contents for Inspiron 3501

Reviews:

Related manuals for Inspiron 3501

Brands by name

Popular brands