Dell Inspiron 3501 Service Manual Download

Page: 11 / 83

Table 1. Screw list (continued)

Component

Secured to

Screw type

Quantity

Screw image

I/O board

Palm-rest and keyboard
assembly

M2x4

Power button

Palm-rest and keyboard
assembly

M2x3

M.2 thermal shield

Palm-rest and keyboard
assembly

Captive screw

M.2 thermal shield

Palm-rest and keyboard
assembly

M2x2.2

M.2 2230 solid-state
drive

Palm-rest and keyboard
assembly

M2x2

System board

Palm-rest and keyboard
assembly

M2x4

Touchpad

Palm-rest and keyboard
assembly

M2x2

Touchpad bracket

Palm-rest and keyboard
assembly

M2x2

Wireless-card bracket

System board

M2x3

Major components of Inspiron 3501

The following image shows the major components of Inspiron 3501.

Removing and installing components

Summary of Contents for Inspiron 3501




















































































Search results

Summary of Contents for Inspiron 3501

Reviews:

Related manuals for Inspiron 3501

Brands by name

Popular brands

Dell Inspiron 3501, Service Manual

Search results

Summary of Contents for Inspiron 3501

Reviews:

Related manuals for Inspiron 3501

Brands by name

Popular brands