Dell Inspiron 3501 Service Manual Download

Page: 13 / 83

16. Hard drive
17. Heat sink
18. Fan

NOTE:

Dell provides a list of components and their part numbers for the original system configuration purchased. These

parts are available according to warranty coverages purchased by the customer. Contact your Dell sales representative for
purchase options.

Base cover

Removing the base cover

Prerequisites

1. Follow the procedure in

Before working inside your computer

About this task

NOTE:

Before removing the base cover, ensure that there is no micro-SD card installed in the micro-SD card slot on your

computer.

The following images indicate the location of the base cover and provides a visual representation of the removal procedure.

Removing and installing components

Summary of Contents for Inspiron 3501




















































































Search results

Summary of Contents for Inspiron 3501

Reviews:

Related manuals for Inspiron 3501

Brands by name

Popular brands

Dell Inspiron 3501, Service Manual

Search results

Summary of Contents for Inspiron 3501

Reviews:

Related manuals for Inspiron 3501

Brands by name

Popular brands