Steps
1. Slide the notch on the battery under the tab on the palm-rest and keyboard assembly and place the battery on the palm-rest
and keyboard assembly.
2. Align the screw holes on the battery to the screw holes on the palm-rest and keyboard assembly.
3. Replace the three screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the connector on the system board.
Next steps
1. Install the
.
After working inside your computer
.
Hard drive
Removing the hard drive
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
About this task
The following images indicate the location of the hard drive and provides a visual representation of the removal procedure.
28
Removing and installing components
