Dell Inspiron 3501 Service Manual Download | Manualshive

Page: 60 / 83

background image

Steps

1. Place the system board on the palm-rest and keyboard assembly.
2. Align the screw hole on the system board to the screw hole on the palm-rest and keyboard assembly.
3. Replace the screw (M2x4) that secures the system board to the palm-rest and keyboard assembly.
4. Connect the speaker cable to the system board.
5. Connect the keyboard cable to the connector on the system board and close the latch.
6. Connect the keyboard-backlight cable to the connector on the system board and close the latch, if applicable.
7. Connect the touchpad cable to the connector on the system board and close the latch.
8. Connect the hard-drive cable to the connector on the system board and close the latch, if applicable.
9. Connect the I/O-board cable to the connector on the system board and close the latch.
10. Connect the fingerprint-reader cable to the connector on the system board and close the latch, if applicable.

60

Removing and installing components

«
...
58
59
60
61
62
...
»

Summary of Contents for Inspiron 3501




















































































Reviews:

No comments

Related manuals for Inspiron 3501

visionbook 12WRx

Brand: UMAX Technologies Pages: 72

TURNCONNECT T101

Brand: jp.ik Pages: 2

Brand: Dell Pages: 59

A13-USE002AM - Adamo - Laptop

Brand: Dell Pages: 58

Brand: Dell Pages: 21

A135-S4637 - Satellite - Pentium Dual Core 1.73 GHz

Brand: Toshiba Pages: 5

Brand: Toshiba Pages: 11

Brand: Dell Pages: 23

Brand: Clevo Pages: 260

VAIO VPCSE2KGX/B

Brand: Sony Pages: 2

VAIO VPCSE2JFX/B

Brand: Sony Pages: 2

VAIO VPCSE2MFY/B

Brand: Sony Pages: 2

VAIO VPCSE2JFX/S

Brand: Sony Pages: 2

VAIO VPCSE2DGX/B

Brand: Sony Pages: 2

VAIO VPCSE2AGX/B

Brand: Sony Pages: 2

VAIO VPCSE25FX/S

Brand: Sony Pages: 2

VAIO VPCSE23FX/S

Brand: Sony Pages: 2

VAIO VPCSE2HFX/B

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands