Steps
1. Place the coin-cell battery into the coin-cell battery holder on the I/O board with the plus sign facing up.
2. Press down on the coin-cell battery to lock it in place in the coin-cell battery holder.
3. Turn the I/O board over.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
, if applicable.
4. Remove the
, if applicable.
About this task
The following images indicate the location of the speakers and provides a visual representation of the removal procedure.
34
Removing and installing components