Dell Inspiron 17R N7110 Service Manual Download Page 96

Page: 96 / 116

Display

Replacing the Display Cable

Follow the instructions in "Before You Begin" on page 9.

Connect the display cable to the display-board connector and secure it

with the tape.

Turn the display panel over and place it on the display back cover.

Replace the display panel (see "Replacing the Display Panel" on page 94).

Replace the display bezel (see "Replacing the Display Bezel" on page 93).

Replace the display assembly (see "Replacing the Display Assembly" on

page 91).

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

display-cable connector

tape

book.book Page 96 Friday, April 13, 2012 2:02 PM

Summary of Contents for Inspiron 17R N7110





















































































































Search results

Summary of Contents for Inspiron 17R N7110

Reviews:

Related manuals for Inspiron 17R N7110

Brands by name

Popular brands

Dell Inspiron 17R N7110, Service Manual

Search results

Summary of Contents for Inspiron 17R N7110

Reviews:

Related manuals for Inspiron 17R N7110

Brands by name

Popular brands