Dell Inspiron 17R N7110 Service Manual Download Page 13

Page: 13 / 116

Top Cover

Top Cover

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 15) before working inside the computer.

Removing the Top Cover

Follow the instructions in "Before You Begin" on page 9.

Press and hold the release button that secures the top cover to the display

back cover.

Slide and lift the top cover.

book.book Page 13 Friday, April 13, 2012 2:02 PM

Summary of Contents for Inspiron 17R N7110





















































































































Search results

Summary of Contents for Inspiron 17R N7110

Reviews:

Related manuals for Inspiron 17R N7110

Brands by name

Popular brands

Dell Inspiron 17R N7110, Service Manual

Search results

Summary of Contents for Inspiron 17R N7110

Reviews:

Related manuals for Inspiron 17R N7110

Brands by name

Popular brands