Dell Inspiron 17R N7110 Service Manual Download Page 51

Page: 51 / 116

Hard Drive

Remove the four screws that secure the hard-drive bracket to the hard

drive.

Lift the hard-drive bracket off the hard drive.

Replacing the Hard Drive

Follow the instructions in "Before You Begin" on page 9.

Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.

Place the hard drive in the hard-drive bracket.

Replace the four screws that secure the hard-drive bracket to the hard

drive.

Place the hard-drive assembly on the computer base.

Slide the hard-drive assembly to connect it to the connector on the system

board.

hard-drive assembly

screws (3)

hard drive

hard-drive bracket

screws (4)

book.book Page 51 Friday, April 13, 2012 2:02 PM

Summary of Contents for Inspiron 17R N7110





















































































































Search results

Summary of Contents for Inspiron 17R N7110

Reviews:

Related manuals for Inspiron 17R N7110

Brands by name

Popular brands

Dell Inspiron 17R N7110, Service Manual

Search results

Summary of Contents for Inspiron 17R N7110

Reviews:

Related manuals for Inspiron 17R N7110

Brands by name

Popular brands