Dell Dimension 4700 Series Owner'S Manual Download Page 14

Page: 14 / 126

Setting Up and Using Your Computer

www

.dell.com | support.dell.com

Connect one of the monitors to the VGA (blue) connector on the back of the computer.

Connect the other monitor to the optional DVI adapter and connect the DVI adapter to the
DVI (white) connector on the back of the computer.

Connecting One Monitor With a VGA connector and One Monitor With a DVI Connector:

Follow the procedures in "Before You Begin" on page 47.

Connect the VGA connector on the monitor to the VGA (blue) connector on the back of the
computer.

Connect the DVI connector on the other monitor to the DVI (white) connector on the back
of the computer.

Connecting a Television

NOTE:

To connect a television to your computer, you must purchase an S-video cable, which is available

at most consumer electronics stores. An S-video cable is not included with your computer.

Follow the procedures in "Before You Begin" on page 47.

Connect one end of the S-video cable to the TV-OUT connector on the back of the computer.

Connect the other end of the S-video cable to the S-video input connector on your television.

Connect the VGA or DVI monitor as described on page 14.

VGA (blue) connector

DVI (white) connector

optional DVI adapter

TV-OUT connector

Summary of Contents for Dimension 4700 Series































































































































Search results

Summary of Contents for Dimension 4700 Series

Reviews:

Related manuals for Dimension 4700 Series

Brands by name

Popular brands

Dell Dimension 4700 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4700 Series

Reviews:

Related manuals for Dimension 4700 Series

Brands by name

Popular brands