Dell D610 - Latitude Centrino Laptop 1.6ghz 512mb 40gb Wifi Xp Pro 14" Lcd User Manual Download Page 69 | Manualshive

Page: 69 / 115

background image

Back to Contents Page

Using PC Cards

Dell™ Latitude™ D610 User's Guide

PC Card Types

PC Card Blanks

Extended PC Cards

Installing a PC Card

Removing a PC Card or Blank

PC Card Types

See "

Specifications

" for information on supported PC Cards.

The PC Card slot has one connector that supports a single Type I or Type II card. The PC Card slot supports CardBus technology and extended PC Cards.
"Type" of card refers to its thickness, not its functionality.

PC Card Blanks

Your computer shipped with a plastic blank installed in the PC Card slot. Blanks protect unused slots from dust and other particles. Save the blank for use
when no PC Card is installed in the slot; blanks from other computers may not fit your computer.

To remove the blank, see "

Removing a PC Card or Blank

."

Extended PC Cards

An extended PC Card (for example, a wireless network adapter) is longer than a standard PC Card and extends outside the computer. Follow these
precautions when using extended PC Cards:

l

Protect the exposed end of an installed card. Striking the end of the card can damage the system board.

l

Always remove an extended PC Card before you pack the computer in its carrying case.

Installing a PC Card

You can install a PC Card in the computer while the computer is running. The computer automatically detects the card.

PC Cards are generally marked with a symbol (such as a triangle or an arrow) to indicate which end to insert into the slot. The cards are keyed to prevent
incorrect insertion. If card orientation is not clear, see the documentation that came with the card.

To install a PC Card:

1.

Hold the card with its orientation symbol pointing into the slot and the top side of the card facing up. The latch may need to be in the "in" position
before you insert the card.

2.

Slide the card into the slot until the card is completely seated in its connector.

If you encounter too much resistance, do not force the card. Check the card orientation and try again.

3.

Rotate the latch closed after inserting the card.

NOTE:

A PC Card is not a bootable device.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

.

«
...
67
68
69
70
71
...
»

Summary of Contents for D610 - Latitude Centrino Laptop 1.6ghz 512mb 40gb Wifi Xp Pro 14" Lcd




















































































































Reviews:

No comments

Related manuals for D610 - Latitude Centrino Laptop 1.6ghz 512mb 40gb Wifi Xp Pro 14" Lcd

TravelMate 630 series

Brand: Acer Pages: 92

TravelMate 630 series

Brand: Acer Pages: 100

Brand: Acer Pages: 31

Aspire 6935 Series

Brand: Acer Pages: 13

TravelMate C100 series

Brand: Acer Pages: 25

TravelMate 270 Series

Brand: Acer Pages: 80

TravelMate 800 Series

Brand: Acer Pages: 94

TravelMate 520 Series

Brand: Acer Pages: 85

TravelMate 650 Series

Brand: Acer Pages: 94

TravelMate 620 Series

Brand: Acer Pages: 92

TravelMate 5100

Brand: Acer Pages: 82

TravelMate Notebook Series

Brand: Acer Pages: 9

Brand: Acer Pages: 112

TravelMate 4100 Series

Brand: Acer Pages: 84

Brand: Acer Pages: 232

TravelMate C200 Series

Brand: Acer Pages: 81

Brand: Acer Pages: 113

TravelMate 4100 Series

Brand: Acer Pages: 128

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands