manualshive.com logo in svg

Dell D610 - Latitude Centrino Laptop 1.6ghz 512mb 40gb Wifi Xp Pro 14" Lcd, User Manual, Page: 87 / 115

Share
Download
Dell D610 - Latitude Centrino Laptop 1.6ghz 512mb 40gb Wifi Xp Pro 14

Back to Contents Page

  

 

 Using Smart Cards  

Dell™ Latitude™ D610 User's Guide

 

  

About Smart Cards 

 

  

Installing a Smart Card 

 

 

 

About Smart Cards  

Smart cards are portable credit-card shaped devices with internal integrated circuits. The top surface of the smart card usually contains an embedded 
processor located under the gold contact pad. The combination of the small size and integrated circuits make smart cards valuable tools for security, data 
storage, and special programs. Using smart cards can improve system security by combining something a user has (the smart card) with something only the 
user should know (a PIN) to provide more secure user-authentication than passwords alone. 

 

Installing a Smart Card  

You can install a smart card in the computer while the computer is running. The computer automatically detects the card. 

To install a smart card: 

 

 

1.

Hold the card so that the gold contact pad is facing upward and pointing toward the smart card slot.  
 

  

 

 

2.

Slide the smart card into the smart card slot until the card is completely seated in its connector. The smart card will protrude approximately 1/2 inch from 
the slot. The smart card slot is located below the PC Card slot.  
 

If you encounter too much resistance, do not force the card. Check the card orientation and try again. 

  

Back to Contents Page

 

 

 

 

NOTE: 

This feature may not be available on your computer.

1  gold contact pad 

2  smart card (top) 

1  PC Card slot 

2  smart card slot 

3  smart card 

Summary of Contents for D610 - Latitude Centrino Laptop 1.6ghz 512mb 40gb Wifi Xp Pro 14" Lcd




















































































































Reviews:

No comments