manualshive.com logo in svg

Dell C1660w Color Laser Print, User Manual

Share
Download
Dell C1660w Color Laser Print User Manual Download Page 43

Setting the IP Address

41

Verifying the IP Settings

You can confirm the settings by using the operator panel, printing the printer settings report, or using the ping 

command.

 

NOTE: 

A Password is required to enter 

Admin Menu

 when 

Panel Lock Set 

is set to 

Enable

. In this case, enter 

the password you specified, and press the 

 (Set) button.

The Operator Panel

1

Press the 

 (

Menu)

 button.

2

Press the   button until 

Admin Menu

 appears, and then press the   

(set)

 button.

3

Ensure that 

Network

 appears, and then press the   

(set)

 button.

4

Press the   button until 

TCP/IP

 appears, and then press the   

(set)

 button.

5

Press the   button until 

IPv4

 appears, and then press the   

(set)

 button.

Check the IP address displayed on the operator panel.

The System Settings Report

1

Print the system settings report.
For details about how to print a system settings report, see "Printing a Report/List Using the Operator Panel" on 

page 125.

2

Verify the correct IP address, subnet mask, and gateway address are listed in the system settings report under 

Wired 

Network

 or 

Wireless Network

.

If the IP address shows 0.0.0.0 (the factory default), an IP address has not been assigned. To assign one for your 

printer, see "Assigning an IP Address" on page 39.

The Ping Command

Ping the printer and verify that it responds. For example, at a command prompt on a network computer, type ping 

followed by the new IP address (for example, 192.168.0.11):

ping 192.168.0.11

If the printer is active on the network, you will receive a reply.

Summary of Contents for C1660w Color Laser Print

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands