Dell C1660w Color Laser Print Page 219 User Manual Download

Page: 219 / 240

Troubleshooting

217

Ghosting

Action

Yes

Adjust the transfer bias.

Launch the

Tool Box

, click

Chart Print

on the

Diagnosis

tab.

Click

Ghost Configuration Chart

The Ghost Configuration Chart is printed.

Launch the

Tool Box

, click

BTR Refresh Mode

on the

Printer

Maintenance

tab.

Check the check box next to

, and then click

Apply New Settings

Click

Chart Print

on the

Diagnosis

tab.

Click

Ghost Configuration Chart

The Ghost Configuration Chart is printed.

Is the problem recovered?

The task is complete.

Go to action 2.

The print media surface may be uneven. Try changing the

Paper Type

setting in the printer driver. For example, change the plain paper to

thick.

On the

General

tab in

Printing Preferences

of the printer driver,

change the

Paper Type

setting.

Is the problem recovered?

The task is complete.

Go to action 3.

Adjust the fusing unit temperature.

Launch the

Tool Box

, and click

Adjust Fusing Unit

on the

Printer

Maintenance

tab.

Adjust the fixing temperature by turning up the value for your

printing media.

Click

Apply New Settings

Click close box to exit

Tool Box

Is the problem recovered?

The task is complete.

Go to action 4.

If you use non-recommended print media, use the print media

recommended for the printer.
Is the problem recovered?

The task is complete.

Contact Dell.

Summary of Contents for C1660w Color Laser Print

















































































































































































































































Search results

Summary of Contents for C1660w Color Laser Print

Reviews:

Related manuals for C1660w Color Laser Print

Brands by name

Popular brands

Dell C1660w Color Laser Print, User Manual

Search results

Summary of Contents for C1660w Color Laser Print

Reviews:

Related manuals for C1660w Color Laser Print

Brands by name

Popular brands