Dell C1660w Color Laser Print User Manual Download

Page: 223 / 240

Troubleshooting

221

Protrudent / Bumpy paper

Clean the CTD sensor.

Clean the CTD sensor. See "Cleaning the Color Toner Density

(CTD) Sensor" on page 195.

Launch the

Tool Box

, and click

Color Registration Adjustment

the

Printer Maintenance

tab.

Clear the

check box for

Auto Registration Adjustment

Click

Start

next to

Auto Correct

Is the problem recovered?

The task is complete.

Go to action 3.

Print the Color Registration Chart and manually correct the color

registration.

Click

Color Registration Adjustment

on the

Printer Maintenance

tab.

Clear the

check box for

Auto Registration Adjustment

Click

Start

next to

Print Color Regi Chart

The color registration chart is printed.

Select the value with the straight line. See "Adjusting Color

Registration" on page 196 for details.

Click

Apply New Settings

Click

Start

next to

Print Color Regi Chart

to print the Color

Registration Chart again.

Adjust the values for every color until the lines at 0 are the straightest.

Is the problem recovered?

The task is complete.

Contact Dell.

Action

Yes

Clean up the fusing unit.

Load one sheet of paper on the MPF, and then print a solid image all

over paper.

Load the printed sheet with the side to be printed on facing down,

and then print a blank sheet of paper.

Is the problem recovered?

The task is complete.

Contact Dell.

Action

Yes

Summary of Contents for C1660w Color Laser Print

















































































































































































































































Search results

Summary of Contents for C1660w Color Laser Print

Reviews:

Related manuals for C1660w Color Laser Print

Brands by name

Popular brands

Dell C1660w Color Laser Print, User Manual

Search results

Summary of Contents for C1660w Color Laser Print

Reviews:

Related manuals for C1660w Color Laser Print

Brands by name

Popular brands