Dell C1660w Color Laser Print Page 221 User Manual Download

Page: 221 / 240

Troubleshooting

219

Auger mark

Wrinkled/Stained paper

Action

Yes

The toner cartridges may be low or need to be replaced. Confirm the

amount of toner in each toner cartridge.

Check the toner level in the

Status

tab in the Status Monitor.

Replace the toner cartridges as necessary.

Is the problem recovered?

The task is complete.

Go to action 2.

Start

Developer Stir Mode

Launch the

Tool Box

, click

Developer Stir Mode

on the

Diagnosis

tab.

Click

Start

Is the problem recovered?

The task is complete.

Contact Dell.

Action

Yes

Verify that the correct print media is being used. See "Supported Paper

Sizes" on page 148 and "Print Media Guidelines" on page 143. If not, use

the print media recommended for the printer.
Is the problem recovered?

The task is complete.

If printing on an

envelope, go to action

2.
If printing on print

media other than

envelopes, contact Dell.

Check the crease. Is the crease within 30 mm of the four edges of the

envelope?

This type of crease is

considered normal.

Your printer is not at

fault.

If the envelope is 220

mm or longer (C5 or

Envelope #10), go to

action 3a.
If the envelope is

shorter than 220 mm

(Monarch or DL), go to

action 3b.

Summary of Contents for C1660w Color Laser Print

















































































































































































































































Search results

Summary of Contents for C1660w Color Laser Print

Reviews:

Related manuals for C1660w Color Laser Print

Brands by name

Popular brands

Dell C1660w Color Laser Print, User Manual

Search results

Summary of Contents for C1660w Color Laser Print

Reviews:

Related manuals for C1660w Color Laser Print

Brands by name

Popular brands