Dell Brocade 815, Troubleshooting Manual

Page: 158 / 172

134 Brocade Adapters Troubleshooting Guide
53-1002145-01
HCM and Installer Message Reference
B
The changes will take
effect only on port reset. Occurs when the user adds a new
authentication policy or edits the existing
authentication policy in the Fibre Channel
Security Protocol dialog box. Information message.
The CHAP Secret and
Retype Secret fields
must have at least 8
alphanumeric
characters. Occurs when the secret key provided in the
CHAP Secret and Retype CHAP Secret field is
less than eight alphanumeric characters. Provide a proper secret key which
has at least 8 alpha numeric
characters.
The External Loopback
Test requires a
plugged-in loopback
cable; otherwise, the test
will fail. Occurs when the user selects external loop
back test. Plug in a loopback cable, and then
run external loopback test to
complete it successfully.
The file “{0}” does not
exist Occurs when file in the driver file field does not
exist. Select an existing driver file.
The following VLAN
operation(s) failed:
<VLAN
operation>:<Runtime
Reason> An error occurs while creating or deleting a
VLAN. Determine the problem with
creating or deleting a VLAN, and
then proceed.
The Name is already in
use. Enter a different
name or clear the
existing name. Occurs when the user enters duplicate name in
Configure Names or Define Names dialog box. Provide unique names in these
dialog boxes.
The operation will take
effect after you click OK
or Apply on the
Configuration dialog. Occurs when the user makes configuration
changes in the Basic Port Configuration dialog
box and clicks Apply or OK. Clicking Apply or OK will make the
configuration changes.
The specified file is not a
valid file to import. Occurs when invalid file is imported through
the Configure Names dialog box. Import a valid file with appropriate
data in the Configure Names dialog
box.
The team name is
duplicated. Please enter
a qualified Team Name. Occurs when the user tries to add a team with
existing team name. Provide different name for the new
team.
The virtual node WWN is
not valid. Enter a valid
Node WWN. Occurs when the user enters a invalid WWN in
the Virtual Port Creation dialog box. Provide valid WWN.
The virtual port is a
duplicate. Enter a valid
WWN. Occurs when the user enters a duplicate virtual
port WWN in the Virtual Port Creation dialog
box. Provide a unique virtual port WWN.
The VLAN name is
reserved. Please choose
a different one. Occurs when the name provided for a VLAN is
already reserved. Use a unique name for the VLAN.
TABLE 14 Host Connectivity Manager messages (continued)
Message Cause Corrective Action or Notes