Dell Brocade 815, Troubleshooting Manual

Page: 153 / 172

Brocade Adapters Troubleshooting Guide 129
53-1002145-01
HCM and Installer Message Reference
B
Choose any of the event
severity levels to filter. Occurs when the user selects an event severity
level, and then clicks OK in the Master Log
Filter dialog box. Select at least one severity level
(such as major or minor), and then
click OK in the Master Log Filter
dialog box.
Clear Filter cannot be
performed while the
Event Properties dialog is
open. Occurs if the Event Properties dialog is kept
open and the user clicks Clear Filter. Close the Event Properties dialog
box, and then click Clear Filter to
clear configured filters.
Could not validate the
selected file as it does
not have meta data
information.\nAre you
sure you want to
continue? Occurs when the meta data information is
missing in the driver file. Download a new driver and try
again.
Dialog cannot be closed
since the driver
update\no-operation is
in progress. Occurs when the driver update or no-operation
is in progress. Information message.
Data Pattern for PCI
Loopback Test cannot be
empty. Enter valid data. Occurs when the Data Pattern field is left
empty while executing a PCI loopback Test. Error message.
Data has been entered in
preparation for adding a
name but the name was
not added. Do you want
to add that name before
you exit? Occurs when user configures names in the
following scenario.
1
Modifies name of any adapter or port
2 Enters WWN and name values in the
Detached WWN/MAC and Name fields
3 Clicks OK.
Verify if the detached WWN/name is
to be added to HCM alias store. If
yes, click Yes to add or No.
Driver update is
completed. Occurs when the driver update has completed. Information message.
Driver update is failed Occurs when the driver update fails. Information message.
Driver update is
successful. Occurs when the driver update is successful. Information message.
Driver update is success.
New agent {0} is up. Occurs when the driver update is success and
the new agent is running. Information message.
Duplicate File: <Export
File Name>. Do you want
to replace the file? Occurs when the user exports names to a file
that already exists. Try to export the names with a
different file name.
Duplicate names still
exists. Click cancel to
discard duplicated
names. Do you want to
continue? Occurs when the user selects Cancel button in
Duplicated Names dialog box without making
any changes. Information message.
TABLE 14 Host Connectivity Manager messages (continued)
Message Cause Corrective Action or Notes