Dell Brocade 815, Troubleshooting Manual

Page: 119 / 172

Brocade Adapters Troubleshooting Guide 95
53-1002145-01
Diagnostics
3
4. Select Queue Test.
5. Click Start.
SCSI test
Use the fcdiag --scsitest command to test SCSI components and display discovered LUN
information, such as LUN number, device type and qualifier, vendor ID, product ID, revision number,
size of LUN, and LUN status.
fcdiag -–scsitest <port_id> <rpwwn> [-l <lpwwn>]
where:
port_id ID of the port from that you want to test. This could be the PWWN, port
hardware path, or user-specified port name. This could also be the
adapter-index/port-index. For example, to specify adapter 1, port 1 use 1/1
as the port identification.
rpwwn Remote PWWN to which you want to trace the route.
lpwwn Logical PWWN. 0 indicates the base port or else the virtual port.
Trace route
Use the BCU and HCM to trace the SAN path between the adapter and remote end point.
Tracing the route through BCU
Use the fcdiag --traceroute BCU command to trace the route between end points.
fcdiag -–fctraceroute <port_id> <rpwwn> [-l <lpwwn>]
where:
port_id ID of the port from which you want to trace the route. This could be the
PWWN, port hardware path, or user-specified port name. This could also be
the adapter-index/port-index. For example, to specify adapter 1, port 1 use
1/1 as the port identification.
rpwwn Remote PWWN to which you want to trace the route.
lpwwn Logical PWWN. 0 indicates the base port.
Tracing the route through HCM
Use the FC Trace Route test to trace the route between the adapter port and a Fibre Channel target
port. To run this test, use the following steps:
1. Launch the HCM.
2. Select Configure > Diagnostics to display the Diagnostics dialog box.
3. Click the FC Protocol Tests tab.
4. Select FC Trace Route.
5. Select the adapter port and target for which you wish to trace the route.