manualshive.com logo in svg

Dell Brocade 815, Troubleshooting Manual, Page: 108 / 172

Share
Download
Dell Brocade 815 Troubleshooting Manual Download Page 108

84

Brocade Adapters Troubleshooting Guide

53-1002145-01

Statistics

3

3. Select the type of statistics that you want to run from the Statistics Name list.

4. Select the polling interval. 

5. Click Apply to save your changes.

To display the Historical Performance dialog box and graphs for a port, use the following steps.

1. Select a device for which you want to generate a historical performance graph.

2. Select Monitor > Performance.

3. Select the Enable Historical Data Collection check box to display the Historical Performance 

dialog box.

4. Select the type of statistics that you want to run from the Statistics Name list.

5. Click Apply to save your changes.

Remote port statistics 

Remote port statistics can help isolate end-to-end login problems. Use HCM and BCU to display 
statistics for the following:

•

Port login (PLOGI) activity

•

Authentication and discovery (ADISC) activity

•

Logout (LOGO) activity

•

RCSNs received

•

Process logins (PRLI) received

•

Hardware abstraction layer (HAL) activity

•

Remote port speed capability (RPSC)

As an example of using these statistics for troubleshooting, if the host cannot see the target, you 
can verify that the remote port (rport) is reporting itself online by comparing the rport offline and 
rport online statistics. The rport online counter should be one greater than the rport offline counter. 
If not, clear the counters and retry connecting to the remote port. Verify the rport online and rport 
offline statistics again.

Displaying target statistics through HCM 

Launch the Target Statistics dialog box using the following steps to display target statistics.

1. Launch the HCM.

2. Select the base adapter port from the device tree window.

3. Click Monitor > Statistics > Remote Port Statistics > Target Statistics.

Summary of Contents for Brocade 815













































































































































































Reviews:

No comments