manualshive.com logo in svg

Dell B3465DN, User Manual

The Dell B3465DN is a high-performance all-in-one printer designed to streamline your office workflow. With its included Imaging Unit Replacing manual, you can easily maintain and replace the unit when needed. Download this user-friendly manual for free from manualshive.com, ensuring optimum performance for your Dell B3465DN printer.

Share
Download
background image

Security menu.......................................................................................................................................155

Settings menu........................................................................................................................................160

Help menu.............................................................................................................................................204

Saving money and the environment.........................................................206

Saving paper and toner.........................................................................................................................206

Using recycled paper ......................................................................................................................................206
Conserving supplies ........................................................................................................................................206

Saving energy........................................................................................................................................206

Using Eco

‑

Mode..............................................................................................................................................206

Reducing printer noise....................................................................................................................................207
Adjusting Sleep mode .....................................................................................................................................208
Using Hibernate Mode....................................................................................................................................208
Setting Hibernate Timeout .............................................................................................................................209
Using Schedule Power Modes ........................................................................................................................209
Adjusting the brightness of the display ..........................................................................................................210

Recycling................................................................................................................................................210

Recycling Dell products...................................................................................................................................210

Securing the printer..................................................................................211

Statement of Volatility..........................................................................................................................211

Erasing volatile memory........................................................................................................................211

Erasing non

‑

volatile memory................................................................................................................212

Erasing printer hard disk memory.........................................................................................................212

Configuring printer hard disk encryption..............................................................................................213

Finding printer security information.....................................................................................................214

Maintaining the printer............................................................................215

Cleaning the printer parts.....................................................................................................................215

Cleaning the printer ........................................................................................................................................215
Cleaning the scanner glass..............................................................................................................................216

Checking the status of parts and supplies.............................................................................................217

Checking the status of parts and supplies on the printer control panel......................................................... 217
Checking the status of parts and supplies from the Embedded Web Server .................................................217

Estimated number of remaining pages.................................................................................................217

Ordering supplies..................................................................................................................................217

Ordering supplies using the Supplies Ordering Utility ....................................................................................217
Ordering supplies using Printer Home............................................................................................................218
Ordering toner cartridges ...............................................................................................................................218
Ordering an imaging unit ................................................................................................................................218
Ordering a maintenance kit ............................................................................................................................218

Contents

5

Summary of Contents for B3465DN





































































































































































































































































































































Reviews:

No comments

Related manuals for B3465DN

Panasonic WORKIO DP-C106 Operating Instructions Manual preview
WORKIO DP-C106
Brand: Panasonic Pages: 166
BIXOLON SPR-350plus Service Manual preview
SPR-350plus
Brand: BIXOLON Pages: 59
G&G IMAGE M4100 Series User Manual preview
IMAGE M4100 Series
Brand: G&G Pages: 147
idp SMART-30S User Manual preview
SMART-30S
Brand: idp Pages: 88
Kyocera 5003i Operation Manual preview
5003i
Brand: Kyocera Pages: 708
Savin MLP175n Brochure & Specs preview
MLP175n
Brand: Savin Pages: 4
VASTEX E20-2024 Assembly And Operation Instructions Manual preview
E20-2024
Brand: VASTEX Pages: 8
Brady BradyJet J4000 User Manual preview
BradyJet J4000
Brand: Brady Pages: 48
Olivetti D-color MF 250 Plus Operating Instructions Manual preview
D-color MF 250 Plus
Brand: Olivetti Pages: 276
Ricoh Pro C5300 Series Adjustment Settings For Operators preview
Pro C5300 Series
Brand: Ricoh Pages: 37
Ricoh Aficio 120 User Manual preview
Aficio 120
Brand: Ricoh Pages: 37
Canon LBP7018C E-Manual preview
LBP7018C
Brand: Canon Pages: 343
Canon LBP654C Series Getting Started preview
LBP654C Series
Brand: Canon Pages: 380
Canon MAXIFY GX4070 Manual preview
MAXIFY GX4070
Brand: Canon Pages: 13
Dell A920 - Personal All-in-One Printer Color Inkjet Owner'S Manual preview
A920 - Personal All-in-One Printer Color Inkjet
Brand: Dell Pages: 83
Dell 2155CDN Specifications preview
2155CDN
Brand: Dell Pages: 5
Dell 2355dn Specifications preview
2355dn
Brand: Dell Pages: 4
Dell 1815 Mono Laser Service Manual preview
1815 Mono Laser
Brand: Dell Pages: 152

Brands by name

Popular brands

Load more brands