Replace imaging unit, 0 estimated pages remain [84.xy]
Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet
that came with the supply or see the “Replacing supplies” section of the
User’s Guide
.
Note:
If you do not have a replacement imaging unit, then visit our Web site or contact the place where you
purchased the printer.
Replace maintenance kit, 0 estimated pages remain [80.xy]
Contact technical support or your Dell printer dealer, and then report the message. The printer is scheduled for
maintenance.
Replace all originals if restarting job.
Try one or more of the following:
•
Touch
Cancel job
to clear the message and cancel the scan job.
•
Touch
Scan from automatic feeder
to continue scanning from the ADF immediately after the last successful scan
job.
•
Touch
Scan from flatbed
to continue scanning from the scanner immediately after the last successful scan job.
•
Touch
Finish job without further scanning
to end the last successful scan job.
•
Touch
Restart job
to restart the scan job with the same settings from the previous scan job.
Reinstall missing or unresponsive imaging unit [31.xy]
Try one or more of the following:
•
Check if the imaging unit is missing. If missing, install the imaging unit.
For information on installing the imaging unit, see the “Replacing supplies” section of the
User’s Guide
.
•
If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.
Note:
If the message appears after reinstalling the supply, then the imaging unit is defective. Replace the
imaging unit.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the
User’s
Guide
.
Note:
If you do not have a replacement cartridge, then visit our Web site or contact the place where you purchased
the printer.
Troubleshooting
260