manualshive.com logo in svg

Dell Alienware m15 R3, Service Manual, Page: 3 / 81

Share
Download
Dell Alienware m15 R3 Service Manual Download Page 3

Contents

1 Working inside your computer..............................................................................................................6

Before working inside your computer.................................................................................................................................6
Safety instructions.................................................................................................................................................................6
Electrostatic discharge—ESD protection............................................................................................................................7
ESD field service kit .............................................................................................................................................................7
Transporting sensitive components......................................................................................................................................8
After working inside your computer....................................................................................................................................8

2 Removing and installing components................................................................................................... 9

Recommended tools.............................................................................................................................................................9
Screw list............................................................................................................................................................................... 9
Base cover........................................................................................................................................................................... 10

Removing the base cover..............................................................................................................................................10
Installing the base cover................................................................................................................................................ 13

Battery.................................................................................................................................................................................15

Lithium-ion battery precautions................................................................................................................................... 15
Removing the battery....................................................................................................................................................15
Installing the battery......................................................................................................................................................16

M.2 solid-state drive........................................................................................................................................................... 17

Removing the M.2 2230 solid-state drive................................................................................................................... 17
Installing the M.2 2230 solid-state drive..................................................................................................................... 19
Removing the M.2 2280 solid-state drive................................................................................................................... 21
Installing the M.2 2280 solid-state drive.....................................................................................................................23

M.2 2230 WWAN/solid-state drive................................................................................................................................24

Removing the M.2 2230 WWAN/solid-state drive...................................................................................................24
Installing the M.2 2230 WWAN/solid-state drive.................................................................................................... 25

Rear-I/O cover...................................................................................................................................................................26

Removing the rear I/O-cover...................................................................................................................................... 26
Installing the rear I/O-cover........................................................................................................................................ 28

Display assembly................................................................................................................................................................ 29

Removing the display assembly....................................................................................................................................29
Installing the display assembly......................................................................................................................................32

Speakers..............................................................................................................................................................................35

Removing the speakers.................................................................................................................................................35
Installing the speakers...................................................................................................................................................36

Touchpad............................................................................................................................................................................ 37

Removing the touchpad................................................................................................................................................37
Installing the touchpad................................................................................................................................................. 37

Keyboard-controller board................................................................................................................................................38

Removing the keyboard-controller board...................................................................................................................38
Installing the keyboard-controller board.....................................................................................................................39

Right I/O-board................................................................................................................................................................ 40

Removing the right I/O-board....................................................................................................................................40

3

Summary of Contents for Alienware m15 R3


















































































Reviews:

No comments