manualshive.com logo in svg

Dell Alienware m15 R3, Service Manual, Page: 47 / 81

Share
Download
Dell Alienware m15 R3 Service Manual Download Page 47

Steps
1. Install the 

fan and heat-sink assembly

.

2. Install the 

left I/O-board

.

3. Turn the system-board assembly over and place the system-board assembly on the palm-rest assembly.

NOTE: When the system board is installed it is removed as an assembly consisting of:

• system board
• left I/O-board
• fan and heat-sink assembly

4. Align the screw holes on the system board with the screw holes on the palm-rest assembly.
5. Replace the two (M2x3) screws that secure the left I/O-board to the palm-rest assembly.
6. Replace the eight (M2x3) screws that secure the system board to the palm-rest assembly.
7. Replace the three (M2x3) screws that secure the fan and heat-sink assembly to the palm-rest assembly.
8. Replace the two (M2x4.5) screws that secure the fan and heat-sink assembly to the palm-rest assembly.
9. Connect the G-sensor cable to the connector on the system board.

NOTE: Ensure that you connect the G-sensor cable before you connect the display cable.

10. Connect the Tobii eye tracker cable to the connector on the system board.

47

Summary of Contents for Alienware m15 R3


















































































Reviews:

No comments