manualshive.com logo in svg

Dell Alienware m15 R3, Service Manual, Page: 74 / 81

Share
Download
Dell Alienware m15 R3 Service Manual Download Page 74

NOTE: Only systems with BIOS Flash Update option in the F12 One-Time Boot Menu can use this function.

Updating from the One-Time Boot Menu
To update your BIOS from the F12 One-Time boot menu, you will need:
•

USB key formatted to the FAT32 file system (key does not have to be bootable)

•

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB key

•

AC power adapter connected to the system

•

Functional system battery to flash the BIOS

Perform the following steps to execute the BIOS update flash process from the F12 menu:

CAUTION: Do not power off the system during the BIOS update process. Powering off the system could make the system
fail to boot.

Steps
1. From a power off state, insert the USB key where you copied the flash into a USB port of the system .
2. Power on the system and press the F12 key to access the One-Time Boot Menu, Highlight BIOS Update using the mouse or arrow

keys then press Enter.

3. The flash BIOS menu will open, and then click the Flash from file.

74

Summary of Contents for Alienware m15 R3


















































































Reviews:

No comments