Dell Alienware m15 R3, Service Manual, Page: 63 / 81

3. Remove the battery .
4. Remove the M.2 2230 solid-state drive . (if applicable)
5. Remove the M.2 2280 solid-state drive . (if applicable)
6. Remove the rear I/O-cover .
7. Remove the display assembly .
8. Remove the speakers .
9. Remove the touchpad .
10. Remove the keyboard-controller board .
11. Remove the right I/O-board .
12. Follow the procedure from step 1 to step 19 in Removing the system board .
13. Remove the power-adapter port .
14. Remove the power-button assembly .
15. Remove the keyboard .
About this task
The following image(s) indicate the location of the palmrest and provides a visual representation of the removal procedure.
Steps
After performing the pre-requisites, you are left with the palmrest.
Installing the palmrest
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the palmrest and provides a visual representation of the installation procedure.
63