manualshive.com logo in svg

Dell Alienware m15 R3, Service Manual, Page: 45 / 81

Share
Download
Dell Alienware m15 R3 Service Manual Download Page 45

15. Remove the two (M2x4.5) screws that secure the fan and heat-sink assembly to the palm-rest assembly.
16. Remove the three (M2x3) screws that secure the fan and heat-sink assembly to the palm-rest assembly.
17. Remove the five (M2x3) screws that secure the system board to the palm-rest assembly.
18. Remove the two (M2x3) screws that secure the left I/O-board to the palm-rest assembly.
19. Lift the system-board assembly from the palm-rest assembly and turn the system-board assembly over.

NOTE: When the system board is removed it is removed as an assembly consisting of:

• system board
• left I/O-board
• fan and heat-sink assembly

20.Remove the 

left I/O-board

.

21. Remove the 

fan and heat-sink assembly

.

Installing the system board

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.

About this task
The following image(s) indicate the location of the system board and provides a visual representation of the installation procedure.

45

Summary of Contents for Alienware m15 R3


















































































Reviews:

No comments