Dell 1815 Mono Laser, Owner'S Manual

Page: 46 / 150

46
Loading Print Media
CAUTION:
Make sure to open the rear cover when you print on transparencies. If not, they may tear while
exiting the machine.
6
After printing, fold away the paper support extension and close the bypass tray.
You can load up to: Make sure:
250 sheets of plain paper in
the paper tray
The paper is designed for use with laser printers.
5 sheets of envelope in the
bypass tray
• The stamp location is in the upper left corner.
• The envelope is designed for use with laser printers.
• Squeeze and slide the paper guide to the width of the envelope.
NOTE:
Do not load envelopes with:
• Holes, perforations, cutouts, or deep embossing.
• Metal clasps, string ties, or metal folding bars.
• Exposed flap adhesive.
5 sheets of labels in the bypass
tray
The label is designed for use with laser printers.
5 sheets of card stock in the
bypass tray
• The card stock is designed for use with laser printers.
• The thickness should not exceed 0.025 inches.
5 sheets of transparency in the
bypass tray
• The transparency is designed for use with laser printers.
• The rough side faces you.