Dell 1815 Mono Laser, Owner'S Manual

Page: 97 / 150

Installing Options
97
7
Close the control board cover.
8
Reconnect the power cord and printer cable, and turn the printer on.
Activating the Added Memory in the PS Printer Properties
After installing the memory DIMM, you need to select it in the printer properties of the PostScript
printer driver so that you can use it:
1
Make sure that the PostScript printer driver is installed on your computer. For details about installing
the PS printer driver, see "Installing Dell Software For Local Printing" on page 32.
2
Click the Windows Start menu.
3
For Windows 98/Me/NT 4.0/2000, select Settings and then Printers .
For Windows XP, select Printers and Faxes .
4
Select the
Dell Laser MFP 1815 PS
printer.
5
Right-click the printer icon and:
In Windows 98/Me, click
Properties .
In Windows 2000/XP, click Print Setup or click Properties and then point to Printing Preferences .
In Windows NT 4.0, click Document Default .
6
For Windows 98/Me, select Device Options .
For Windows NT 4.0/2000/XP, select Device Settings .
7
Select the memory DIMM you installed from Printer Memory in the Installable Option section.
For Windows 98, select Installable Option VMOption change setting for:VMOption
change memory
.
8
Click OK .
→ → →