Dell 1350CNW User Manual Download Page 44

Page: 44 / 328

Setting the IP Address

Press the button until

TCP/IP

appears, and then press the button.

Press the button until

IPv4

appears, and then press the button.

Ensure that

Get IP Address

appears, and then press the button.

Ensure that

Panel

appears, and then press the button.

Press the button and ensure that

Get IP Address

appears.

Press the button until

IP Address

appears, and then press the

button.

The cursor is located at the first digit of the IP address.

Press the or button to enter the numbers for the IP address.

Press the button.
The next digit is selected.

Repeat step 11 and step 12 to enter all the digits in the IP address, and

then press the button.

Press the button and ensure that

IP Address

appears.

Press the button until

Subnet Mask

appears, and then press the

button.

The cursor is located at the first digit of the subnet mask.

Press the or the button to enter the numbers for the subnet mask.

Press the button.
The next digit is selected.

Repeat step 16 and step 17 and set subnet mask, and then press the

button.

Press the button and ensure that

Subnet Mask

appears.

Press the button until

Gateway Address

appears, and then press

the

button.

The cursor is located at the first digit of the gateway address.

Press the or button to enter the numbers for the gateway address.

Press the button.
The next digit is selected.

Repeat step 21 and step 22 to set gateway address, and then press the

button.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands

Dell 1350CNW, User Manual

Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands