Dell 1350CNW User Manual Download Page 219

Page: 219 / 328

Understanding the Printer Menus

215

Understanding the Printer Menus

When your printer is configured as a network printer available to a number of

users, the access to the

Admin Menu

menus can be limited. This prevents

unauthorized users from using the operator panel to inadvertently change the

default menu settings that has been set by the administrator. However, you

can select settings for individual print jobs using the printer driver. Print

settings selected from the printer driver have precedence over the default

menu settings selected from the operator panel.

Report/List

Use the

Report/List

menu to print the settings and history information

of your printer.

NOTE:

A Password is required to enter the

Report/List

menu when

Panel

Lock Set

is set to

Enable

. In this case, enter the password you specified,

and press the

button.

Printer Setting

Purpose:

To print a list of the information such as the printer name, service tag, the

status of the printer, consumables, and the network settings.

Device Settings

Purpose:

To print a detailed list of all the settings on the operator panel menus.

Job History

Purpose:

To print a detailed list of the print jobs that have been processed. This list

contains the last 10 jobs.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands

Dell 1350CNW, User Manual

Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands