manualshive.com logo in svg

Dell 1350CNW, User Manual

Share
Download
Dell 1350CNW User Manual Download Page 155

Dell Printer Configuration Web Tool

151

Security

The 

Security

 tab contains the 

Set Password

 and 

IP Filter (IPv4)

 pages.

Set Password

Purpose:

To set or change the password that is required to access the setup parameters 

of the printer from the 

Dell Printer Configuration Web Tool

.

This page can also be displayed by clicking 

Set Password

 in the left frame.

Values:

 

NOTE: 

If you forgot your password, initialize NVM (non-volatile memory) to restore 

the password to the default (NULL). See "Reset Print Server" on page 150.

 

NOTE: 

When you change the password to lock the operator panel, set the 

password from Panel Lock Set in the Printer Settings.

Initialize NIC 

NVRAM 

Memory and 

restart printer.

Click the 

Start

 button to initialize NVM. Network settings will 

revert to the factory default settings and reboot the network 

capability.

Restart Printer

Click the 

Start

 button to reboot the printer.

Administrator 

Password

Sets the password using up to 10 alphanumeric characters. The 

password will appear as asterisks (*) in the field when it is entered.

Re-enter 

Administrator 

Password

Enter the password again to confirm.

Access denial 

by the 

authentication 

failure of the 

Administrator

Sets the maximum number that the administrator fails to log in. If 

you set 0, this feature is disabled.
The failed attempts counter is reset to 0 by a successful 

authentication.
Every administrator authentication is rejected if the counter 

exceeds the maximum number of failed login attempts.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands