Dell 1350CNW User Manual Download Page 179

Page: 179 / 328

Loading Print Media

175

Adjust the width guides until they rest lightly against the edges of the

stack of print media.

Select the paper type from the printer driver if the loaded print media is

not standard plain paper. If a user-specified print media is loaded in the

PSI, you must specify the paper size setting by using the printer driver.

Loading an Envelope in the Priority Sheet Inserter (PSI)

NOTE:

Be sure to fully insert the envelope until it stops. Otherwise, print media that

is loaded on the MPF will be fed.

NOTE:

When you print on envelopes, be sure to specify the envelope setting on the

printer driver. If not specified, the print image will be rotated 180 degrees.

When Loading Envelope#10, DL, or Monarch

Load an envelope with the side to be printed on facing up, the flap side facing

down, and the flap turned to the right.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for 1350CNW









































































































































































































































































































































Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands

Dell 1350CNW, User Manual

Search results

Summary of Contents for 1350CNW

Reviews:

Brands by name

Popular brands